Genuine Lamp for EPSON EB-95 Projector. 8715946478609
Description
ELPLP60 / V13H010L60 Replacement Lamp for EPSON EB-95 Projector. 8715946478609
Fitting Instruction
Avoid touching the naked bulb with bare hands as body oil left on the lamp may cause it to overheat. This may provoke an explosion.
How to remove spent lamp from a projector :
- Ensure the projector is powered off using the Power button
- Disconnect the power cable after powering down the projector.
- Allow the machine to cool down for a few minutes. 5 – 10 minutes should be sufficient
- Remove the lamp cover by unscrewing the screw that restrains it. Usually one screw.
- Loosen the screws that fasten the lamp to the chassis. Usually 2 or three screws.
- Pull out the lamp using the handle or by inserting your finger in the grove on the lamp.
Next step.
- Using a light brush or vacuum, clean the empty lamp bay of accumulated dust and soots.
- Insert the new lamp in the open lamp bay and fasten the restraining screws.
- Place the lamp bay cover and fasten the screw as well.
- Reconnect the power cable
- Using either the remote control or the power button on the front panel, switch on the projector.
Troubleshooting guide; Please follow here
Additional information
| Weight | 338 g |
|---|---|
| Lamp Title | ELPLP60 / V13H010L60 Projector Lamp for EPSON EB-95. 8715946478609 |
| Projector Make | |
| Projector Model | |
| Lamp Quantity | |
| Lamp Type | |
| Lamp Hours | |
| Lamp Power | |
| Lamp SKU | |
| Lamp Ean Code |
